Showing 10–18 of 19 results

  • Solid brass air vent in black patina with threaded inside for plugging the hole with matching plug made by w.odd custom drums

    Plugable Air Vent

    8 €

    Plugable Air Vent for steel or wooden shells.

     ⌀18mm, hole  ⌀8mm
    Required hole is  ⌀14mm

    Please state for what thickness you are ordering, so we can make them to fit perfectly.

    Coming in: raw brass, black patina, brown patina and sandblasted colour.

    Available on order!

  • Maple and abonos snare drum with solid brass hardware made by w.odd custom drums

    Romell

    850 €

    14″x6.5″ Maple & Abonos body with all brass hardware

    – 12mm shell
    – 45° bearing edge
    – Rolled 5mm brass hoops
    – 10 lugs
    – Swivel throw off
    – Brass T-rods
    – 4 Pluggable Air-Vents

    Available on order!

     

     

     

  • Single base double sided tube snare drum lug sandblasted with lacquer finish made of solid brass made by w.odd custom drums

    Single base Euro lug

    7 €

    Double sided snare drum lug, made out of solid brass.
    ⌀16mm base ⌀8mm tube

    These lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.

    Distance from the shell to the center of the lug is 14.5mm

    You choose tube length.

    Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
    We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.

    Coming in: raw brass, black patina, brown patina and sandblasted colour.

    Available on order!

  • Single base double sided hex snare drum lug sandblasted with black patina finish made of solid brass made by w.odd custom drums

    Single base Hex lug

    7 €

    Single base hex drum lug, made out of solid brass.
    15mm hex base ⌀8mm tube

    These lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.

    Distance from the shell to the center of the lug is 14.5mm

    You choose tube length.

    Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
    We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.

    Coming in: raw brass, black patina, brown patina and sandblasted colour.

    Available on order

  • Single base double sided snare drum lug sandblasted with black patina made of solid brass with brass shawings inlay made by w.odd custom drums

    Single base Super lug

    8 €

    Double sided snare drum lug, made out of solid brass with brass shavings in the front.
    You can choose shavings or wood inlay.
    ⌀18mm base ⌀8mm tube

     

    These lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.

    Distance from the shell to the center of the lug is 14.5mm

    You choose tube length.

    Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
    We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.

    Coming in: raw brass, black patina, brown patina and sandblasted colour.

    Available on order!

  • Single base solid brass lug for snare tom or bass drum in black patina with standard t-rod thread made by w.odd custom drums

    Threaded base lug

    5 €

    Threaded base drum lug, made out of solid brass.
    ⌀16mm base 

    These lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.

    Distance from the shell to the center of the T-rod is 14.5mm

    Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
    We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.

    Coming in: raw brass, black patina, brown patina and sandblasted colour.

    Available on order!

  • Single base solid brass tube lug in copper brown patina finish made by w.odd custom drums

    Tom – Bass Euro lug

    6 €

    Single base tom-bass drum euro lug, made out of solid brass.
    Can be used on a snare drum too.
    ⌀16mm base ⌀8mm tube

    These lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.

    Distance from the shell to the center of the lug is 14.5mm

    You choose tube length.

    Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
    We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.

    Coming in: raw brass, black patina, brown patina and sandblasted colour.

    Available on order!

  • Single base double sided hex snare drum lug in brown patina finish made of solid brass made by w.odd custom drums

    Tom-Bass Hex lug

    6 €

    Single base hex drum lug, made out of solid brass.
    Can be used on a snare drum too.
    15mm hex base ⌀8mm tube

    These lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.

    Distance from the shell to the center of the lug is 14.5mm

    You choose tube length.

    Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
    We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.

    Coming in: raw brass, black patina, brown patina and sandblasted colour.

    Available on order!

  • Single base solid brass lug with brass shawings inlay sandblasted finish made by w.odd custom drums

    Tom-Bass Super lug

    8 €

    Single base tom-bass drum Super lug, made out of solid brass with brass shavings in the front.
    You can choose shavings or wood inlay.
    Can be used on a snare drum too.
    ⌀18mm base ⌀8mm tube

    These lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.

    Distance from the shell to the center of the lug is 14.5mm

    You choose tube length.

    Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
    We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.

    Coming in: raw brass, black patina, brown patina and sandblasted colour.

    Available on order!