Showing 1–9 of 19 results
-

-

Lugs (11)
-

Snare drums (3)
-

Air Vent
5 €Air Vent for steel or wooden shells.
⌀16mm, hole ⌀7mm
Required hole is ⌀12mmPlease state for what thickness you are ordering, so we can make them to fit perfectly.
Coming in: raw brass, black patina, brown patina and sandblasted colour.
Available on order!
-

Ash-Hole
750 €13″x8″ Ash body with all custom made steel hardware
– 15mm Ash shell
– 45° bearing edge
– Rolled 5mm hoops
– 8 lugs
– Mag throw off
– Industrial lookThis snare produces very dry, crispy and loud tone, air is disposed through holes so there is no “ring” or overtones to it. Due to very stiff hardware and stave shell configuration wires are engaged with minimal head contact.
This one is also unique in recording setups. You only need one mic pointed to the body to catch all of the tones.
Best performs in higher tuning ranges.
Available on order!
-

Bass drum Beater
35 €Unique wooden bass drum beates.
Body: Boxwood / Brazilian walnut
Rod: 6.5″ stainless
Screws: Brass/aluminumRanging from 80 – 110 grams
-

Double base Euro lug
10 €Double sided snare drum lug, made out of solid brass.
⌀16mm base ⌀8mm tubeThese lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.
Distance from the shell to the center of the lug is 14.5mm
You choose tube length and center to center distance.
Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.Coming in: raw brass, black patina, brown patina and sandblasted colour.
Available on order!
Contact us to buy -

Double base Hex lug
10 €Double base hex drum lug, made out of solid brass.
15mm hex base ⌀8mm tubeThese lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.
Distance from the shell to the center of the lug is 14.5mm
You choose tube length and center to center distance.
Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.Coming in: raw brass, black patina, brown patina and sandblasted colour.
Available on order!
-

Double base Super lug
12 €Double base snare drum lug, made out of solid brass with brass shavings in the front.
You can choose shavings or wood inlay.
⌀18mm base ⌀8mm tubeThese lugs take standard 7/32″, #12-24 tension rods.Taking M4 mounting screws.
Distance from the shell to the center of the lug is 14.5mm
You choose tube length and center to center distance.
Coming with the Ø 8mm nipple on the inside, size depending on thickness of your snare drum.
We usually make it 2mm to enter the shell, but for thin metal shells it is 0.5-1mm thick.Coming in: raw brass, black patina, brown patina and sandblasted colour.
Available on order!
-

Drum Keys
35 €Solid brass drum key, machined on all sides and made to fit in every hand.
Knurled, hammered, scalloped.. Choose yours
-

Exile
800 €13″x8″ Ash body with all brass hardware
– 12mm shell
– 45° bearing edge
– Rolled 5mm brass hoops
– 8 lugs
– Swivel throw off
– Brass T-rods
– Crushed crystal inlay lugsAvailable on order!
-

Groove Block
35 €Amplify and simplify your cross sticking with this gadget
Goes on 13″ & 14″ snares with 8 & 10 lugs
Ash body – aluminum holders